What is the UNS S32750 casting grade equivalent?

UNS S32750 is a super duplex stainless steel, also known as SAF2507. It is available as solid bar, plate, pipe, fittings, forgings and castings. When specifying castings, the nearest equivalent specifications are ASTM A890, ASTM A995 and ASME SA351/995 grade CE3Mn or 5A, also written as J93404 or 25Cr-7Ni-Mo-N.

Langley Alloys carries a comprehensive stock of UNS S32750 (1.4401, F53) as solid bar up to 16” in diameter and plate up to 3” thickness. Machining components from solid bar or plate can help to reduce risk of rejection, as the wrought product form is much less likely to suffer from internal defects. As these defects become apparent on castings only after machining, considerable time and expense can be lost. However, castings can be an effective way to produce more complex geometries or reduce the cost for larger components or longer production runs. The mechanical properties of a wrought product (rolled, forged) is significantly better than a cast product.

The Key Features of UNS S32750

Here are some of the key features of UNS S32750 –

  • Superb resistance to stress corrosion cracking (sometimes referred to as SCC) in chloride-bearing environments
  • Excellent resistance to crevice corrosion and pitting
  • High resistance to general corrosion
  • Good weldability
  • Physical properties which offer advantages in terms of design
  • High resistance to erosion corrosion and corrosion fatigue
  • Very high mechanical strength

SAF2507 is a registered trademark of Sandvik Intellectual Property AB.

Got any Questions? Get in Touch

For more information about super duplex stainless steel alloys, please don’t hesitate to contact us today. We would be happy to answer any questions that you may have regarding specifications and common applications.

Request a Quote Close