Enquire About
HIDURON 107

HIDURON^® 107

Specifications of Hiduron 107

MSA-MDS-CN3-BAR
NES 780 Part 2
DGS 320A (obsolete)
DGS 8454 (obsolete)
BS 2872/4 CN 107
MIL-C-15726F C71500

Downloads
Purchase Specifications >
HIDURON 107 Bar & Forgings Purchase Specification

+ Hiduron 107 Features

+ Applications of Hiduron 107

+ Forms of HIDURON 107 Available

+ Chemical Specification of Hiduron 107

+ Physical Properties of Hiduron 107

+ Basic Properties of Hiduron 107 - Mechanical Properties

Ruling Sections up to 15mm
0.2% Proof Stress (N/mm² )[ksi] minimum	130 [18.8]
Ultimate Tensile Strength (N/mm²) [ksi] minimum	350 [50.7]
Elongation (%) minimum	36
Impact Energy (J)[ft lb]	54 [39.8]

Ruling Sections 15mm up to 25mm
0.2% Proof Stress (N/mm² )[ksi] minimum	120 [17.4]
Ultimate Tensile Strength (N/mm²) [ksi] minimum	330 [47.8]
Elongation (%) minimum	34
Impact Energy (J)[ft lb]	54 [39.8]

Ruling Sections 25mm up to 35mm
0.2% Proof Stress (N/mm²)[ksi] minimum	115 [16.7]
Ultimate Tensile Strength (N/mm²)[ksi]minimum	320 [46.4]
Elongation (%) minimum	32
Impact Energy (J)[ft lb]	54 [39.8]

Ruling Sections above 35mm and forgings
0.2% Proof Stress (N/mm²)[ksi] minimum	110 [16.0]
Ultimate Tensile Strength (N/mm²)[ksi]minimum	310 [45.0]
Elongation (%) minimum	30
Impact Energy (J)[ft lb]	54 [39.8]

+ Machining Advice of Hiduron 107

+ Alloy Comparisons

Disclaimer
Data in this Hiduron 107 page is provided solely for the purposes of distribution of information. Langley Alloys cannot make guarantees with respect to subject matter or accuracy of this information. Langley Alloys specifically disclaims all guarantees, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose. This publication may include technical inaccuracies or typographical errors. If errors are found, please make a notification via e-mail to: info@langleyalloys.com

Alloys	Bars & Sections	Hot & Cold Rolled Plate	Ingot & Billet	Forged Products	Sand Castings
HIDURON 130
HIDUREL 5
HIDURON 191
HIDURON 107
HIDURON 102

Elements	Al	Bi	B	C	Cu	Fe	Mn	Ni	Pb	P	Si	S	Zn
Minimum					REMAINDER	0.4	0.6	29
Maximum	0.03	0.002	0.02	0.05		1.0	1.5	33	0.01	0.01	0.05	0.02	0.5

Density (Kg.m^-3)	8950
Magnetic Permeability	<1.01
Young’s Modulus (N/mm²)	151 x 10³
Modulus of Rigidity (N/mm²)	56 x 10³
Specific Heat, 20°C (J.Kg^-1.°K^-1)	386
Electrical conductivity, 20°C (m.O^-1.mm^-2)	3 (5% IACS)
Thermal conductivity, 20°C (W.m^-1.°K^-1)	29
Mean coefficient of thermal expansion, 20-300°C (°K^-1)	12 x 10^-6

Operation	Cutting Speed m/min (ft/min)	Feed Rate mm/rev (in/rev)	Depth of cut mm (in)
Drilling	15-40 [50-130]	0.075-0.5 [0.003-0.02]
Turning - Roughing	75-180 [250-590]	0.4-0.75 [0.015-0.03]	1.1-3.0 (0.04-8.5)
Turning - Finishing	90-240 [300-780]	0.2-0.4 [0.008-0.015]	0.4-0.75 [0.015-0.03]
Tips	Carbide tipped using water-soluble lubricant

Alloy Comparisons	HIDURON 107	90-10 Copper-Nickel	Ni-Al Bronze	HIDURON 191
0.2% Proof Strength (N/mm²), minimum	115	100	247	425
Corrosion Resistance in seawater (mm/yr)	0.025	0.04	0.075	0.02
Maximum seawater flow rate to avoid erosion/corrosion (m/s)	4.6	3.7	4.3	4.8

HIDURON® 107

HIDURON^® 107