Enquire About
FERRALIUM 255-SD40

FERRALIUM^® 255-SD40

FERRALIUM 255-SD40 Bar stock sizes available
Diameter (in)	Diameter (mm)	kg per m
1/2	12.7	0.98
3/8	15.88	1.54
3/4	19.05	2.23
7/8	22.23	3.02
1	25.4	3.97
1 1/8	28.58	5.02
1 1/4	31.75	6.17
1 3/8	35.05	7.54
1 1/2	38.10	8.89
1 5/8	41.40	10.53
1 3/4	44.45	12.10
1 7/8	47.75	13.97
2	50.80	15.84
2 1/4	57.15	20.04
2 1/2	63.50	24.73
2 3/4	69.85	29.91
3	76.20	35.62
3 1/4	82.55	41.79
3 1/2	88.90	48.48
3 3/4	95.25	55.63
4	101.60	63.30
4 1/4	107.60	71.47
4 1/2	114.30	80.13
4 3/4	120.65	89.28
5	127.00	98.92
5 1/4	133.35	108.90
5 1/2	139.70	119.69
6	152.40	142.45
6 1/2	165.10	167.18
6 3/4	171.45	180.40
7	177.80	193.88
7 1/2	190.05	221.40
8	203.20	253.22
9	228.60	320.46
10	254.00	395.63
12	304.80	569.70
14	355.60	775.46

Specifications of Ferralium 255-SD40

FERRALIUM to MSA-MPS-51VS-SD40-BAR
NORSOK MDS D51 to D55 and D57
EN 10088-1 1.4507
ASTM A182 UNS S32550 Forged Flanges Grade F61
ASTM A473 UNS S32550 Forgings
ASTM A240 UNS S32550 Sheet and Plate
ASTM A479 UNS S32550 Bar
ASTM A276 UNS S32550 Condition A
ASTM A790 UNS S32550 Seamless and Welded Pipe
ASTM A815 UNS S32550 Pipe Fittings
A789 UNS S32550 Seamless & Welded Tubing
ASME Approval as Table UHA 23 and Code Case 1883
NACE MR 01-75

Downloads
Purchase Specifications >
FERRALIUM SD40 Bar Purchase Specification

Past Papers >
The Influence of Copper on the Pitting Corrosion of Duplex Stainless Steels UNS S32550 L F Garfias-Mesias J M Sykes and C D S Tuck Corrosion Vol 54 No 1 1998 p 40

Technical Data Sheets >
Machining FERRALIUM 255 Welding FERRALIUM 255

+ Ferralium 255-SD40 Features

+ Applications of Ferralium 255-SD40

Chemical Process Industry:

Sulphuric Acid Production, Nitric Acid Processes, Polypropylene Production, PVC ProductionTitanium Dioxide Production, Caustic Evaporators, Equipment Handling Organic and Fatty Acids

Marine Industry and Shipbuilding:

Propellers and Shafts, Rudders, Shaft Seals, Pumps, Bolts and Fasteners, Valves, Instrumentation, Oil and Chemical Tankers

Oil and Gas Industry:

Pumps, Valves, Pipe, Vessels, Wellhead Equipment, Subsea Equipment

Pollution Control:

Fans and pumps, Wet Scrubbers, Incinerators

Copper Smelting:

ID Fans, Tuyere bars, Wet Scrubbers, Leaching Area Precipitators

Pulp and Paper Industry:

Black liquor heater tubes, Digester Blow Valves, Rotary Feed Valves, I.D.Fans, Brownstock Washers, Precipitators, Bleaching Components

Food Industry:

Sugar Cane Centrifuges, Corn and Vegetable processing plant

Agrochemicals:

Fertilizer Production (Wet phosphoric acid)

Civil Engineering:

Statue of Liberty supporting structure, Swimming Pools, Sewage Treatment

+ Forms of Ferralium 255-SD40 Available

+ Chemical Specification of Ferralium 255-SD40

+ Physical Properties of Ferralium 255-SD40

+ Basic Properties of Ferralium 255-SD40- Mechanical Properties

+ Machining Advice of Ferralium 255-SD40 - Hot worked and precipitation hardened alloy

+ KEY Features of Ferralium 255-SD40

Disclaimer
Data in this Ferralium 255-SD40 page is provided solely for the purposes of distribution of information. Langley Alloys cannot make guarantees with respect to subject matter or accuracy of this information. Langley Alloys specifically disclaims all guarantees, expressed, implied or otherwise, including without limitation, all warranties of merchantability and fitness for a particular purpose. This publication may include technical inaccuracies or typographical errors. If errors are found, please make a notification via e-mail to: info@langleyalloys.com

Alloys	Bars & Sections	Hot & Cold Rolled Plate	Ingot & Billet	Forged Products	Sand Castings
FERRALIUM 255-SD50
FERRALIUM 255-SD40
FERRALIUM 255-3SF
FERRALIUM 255-3AF
FERRALIUM 255-3SC
FERRALIUM 255-FG46
ALLOY 2507
ALLOY S32760

Elements	C	Cr	Cu	Fe	Mo	Mn	N	Ni	P	S	Si
Minimum		24.0	1.50	REMAINDER	2.90		0.10	4.50
Maximum	0.040	27.00	2.50		3.90	1.50	0.25	6.50	0.040	0.030	1.00

Density (Kg.m^-1)	78.1
Magnetic Permeability	33
Young’s Modulus (N/mm²)	199 x 10³
Specific Heat, 20°C (J.Kg^-1.°K^-1)	475
Fracture Toughness, K_Q (MPa.m^½)	98
Specific Electrical Resistance, 20°C (µO.m)	0.80
Thermal conductivity, 20°C (W.m^-1.°K^-1)	14.2
Mean coefficient of thermal expansion, 20-100°C (°K^-1)	11.1 x 10^-6

0.2% Proof Stress (N/mm² )[ksi] minimum	550 [79.8]
Ultimate Tensile Strength (N/mm²) [ksi] minimum	760 [110.3]
Elongation (%) minimum	25
Hardness (HBN)	270max
Charpy V-notch Impact at ambient Temp (J) [ft.lb]	80min [59min]
Charpy V-notch Impact at -46°C (J) [ft.lb]	45av, 35min [33av, 25.8min]

Additional Testing
ASTM G48A Corrosion test at 50°C	No pitting and weight loss <4.0g/m²
Ultrasonic Testing	According to ASTM A388
Ferrite Content	35%-55%
Microstructure	Microstructure certified free from grain boundary carbides, sigma, chi and laves phases

Operation	Cutting Speed m/min (ft/min)	Feed Rate mm/rev (in/rev)	Depth of cut mm (in)
Milling	40 (130)	0.05-0.13 mm/tooth 0.02-0.005 in/tooth	0.5-6.0 (0.02-0.25)
Drilling – 6.4mm (1/4”) dia	250rpm	0.075 (0.003)
Drilling – 12.7mm (1/2”) dia	250rpm	0.125 (0.005)
Drilling – 25.4mm (1”) dia	150rpm	0.28 (0.011)
Turning - Roughing	30-45 (100-150)	0.20 – 0.38 (0.008-0.015)	3 (0.125)
Turning - Finishing	50-60 (165-200)	0.13 – 0.20 (0.005-0.008)	0.5 (0.02)
Tooling	Milling/Turning: Carbide (SANDVIK GC 235, SECO T25M) Drilling: HSS, point angle 118°, chisel angle 120°

Alloy Comparisons	S17400 (17- 4PH)	S31803	718 (ST)	S31254	FERRALIUM 255-SD40
0.2% Proof Strength (N/mm²), minimum	1070	450	550 max	300	550
Corrosion Rate (mm.y^-1) Seawater	~1	<0.01	<0.01	<0.01	<0.01
Corrosion Rate (mm.y^-1) 10% sulphuric acid at 80°C	10	0.4	<0.15	1.5	<0.15
Corrosion Rate (mm.y^-1) Boiling 50% nitric acid	<0.15	<0.15	<0.15	0.4	<0.15
Wear Properties related to Hardness (HBN)	RC38	RC25	RC20	RC20	RC28

FERRALIUM® 255-SD40

FERRALIUM^® 255-SD40